|
-NEW PRODUCT
NEWS-
2011
TORCHTOOLS
Brochure
2011
GENTEC Plumbing
HVAC
Catalogue
2011
GENTEC
Welding
Catalogue
2011
GENTEC
Welding
Accessories
2011
GENTEC
Gauge
Protectors
Brochure
2011
GENTEC
Cutting Tips
2011
GENTEC
Compact
Torch
Catalogue
2011
GENTEC
Jewelry
Torch
Catalogue
| |
PREVENT
CARPAL TUNNEL / ARTHRITIS!™
Aluminum B-Tank Handle™
Is For
Daily Field Use
SAFETY
-Ergonomic Tank Carry Handle™
-Makes hand-carrying
Oxygen tanks
easier & safer!™
-Made from Aircraft grade 6061 Aluminum, NOT PLASTIC
-Wide ergonomic roller grip for BIG HANDS™
-Reduces climbing risk when ascending, descending ladders, stairs, etc™
-Proven to reduce Hand, Arm, Shoulder, Neck, Back, and Leg Fatigue, PAIN &
Injury™
FUNCTIONALITY:
-Simple to install, use, transfer from tank to tank™
-Makes pulling tanks out of / putting tanks into vehicle tank holders EASIER!™
-Can be fixed or allowed to swing™
"Handle can rotate over 190-degrees around the regulator nut: perfectly works
with all wrist and hand movements"™
-IF regulator FAILS, easy to swap out, NO dependencies on poor regulator equipment
-Perfectly ergonomically balanced for your hands, arms, neck, back, and body™
-Chiropractors FULLY support function and ergonomic benefits™
GET COST REIMBURSED BY YOUR MEDICAL INSURANCE COMPANY - products value speaks
for itself™
FORM:
-Perfect Tank Handle placement for optimal balance
-UNIVERSAL: Works with ALL Nitrogen Regulators: Gentec®, TurboTorch®, Victor®,
Harris®, ESAB®, Uniweld®, etc.
-Stops excessive Oxygen Regulator wear damage - no more carrying tank
by regulator body
ECONOMICS:
SAVES MONEY, TIME, your HANDS and body!™
-Lengths Oxygen Regulator Life™
153M Series Manifold Regulators
Model 153M
Series Manifold Regulators are specially designed for manifold systems. They are
ideal for use with heavy flow gas distribution systems.
- Single stage
construction
- Body and housing
cap are machined from class "A" brass bar stock
- Delrin
cap bushing for smooth adjustments
- Sintered bronze
inlet filter
- 2-1/2" gauges for
easy reading
- 3-1/4" diaphragm
- Conforms to CGA
E-4 Standard for Gas Pressure Regulators
153M Series
#
|
GAS SERVICE |
MAXIMUM INLET PRESSURE (PSI) |
MAXIMUM DELIVERY PRESSURE (PSI) |
INLET GAUGE |
OUTLET GAUGE |
INLET CONNECTION |
OUTLET CONNECTION |
153MX-200
|
Oxygen, Inert Gas, Air |
3000 |
10-200 |
2-1/2", 4000PSI |
2-1/2", 400PSI |
1"-11 1/2NPS RH(M) |
1"-11 1/2NPS RH(F) |
153MIN-125
|
Inert Gas |
3000 |
5-125 |
2-1/2", 4000PSI |
2-1/2", 200PSI |
1"-11 1/2NPS RH(M) |
1"-11 1/2NPS RH(F) |
1 psi =
0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2,
1 SCFH = 0.0283 m3/h = 0.472 LPM
|
|
|
153TM Series Two
Stage Manifold Regulators
Model 153TM
Series Manifold Regulators are specially designed for manifold systems. They are
ideal for use with high flow gas distribution systems.
- Two stage
construction
- Body and housing
cap are machined from class "A" brass bar stock
- Delrin cap bushing
for smooth adjustments
- Sintered bronze
inlet filter
- 2-1/2" gauges for
easy reading
- 2" & 3-1/4"
diaphragms
- Conforms to CGA
E-4 Standard for Gas Pressure Regulators
153TM Series
MODEL #
(PART #) |
GAS SERVICE |
MAXIMUM INLET PRESSURE (PSI) |
MAXIMUM DELIVERY PRESSURE (PSI) |
INLET GAUGE |
OUTLET GAUGE |
INLET CONNECTION |
OUTLET CONNECTION |
153TMX-125
|
Oxygen, Inert Gas, Air |
3000 |
5-125 |
2-1/2", 4000PSI |
2-1/2", 200PSI |
1"-11 1/2NPS RH(M) |
1"-11 1/2NPS RH(F) |
1 psi =
0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2,
1 SCFH = 0.0283 m3/h = 0.472 LPM
|
|
|
155M Series Manifold
Regulators
Model 155M
Series Manifold Regulators are specially designed for manifold systems. They are
ideal for use with extra heavy flow gas distribution systems.
- Single stage
construction
- Body and housing
cap are machined from class "A" brass bar stock
- Delrin cap bushing
for smooth adjustments
- Sintered bronze
inlet filter
- 2-1/2" gauges for
easy reading
- 3-1/4" diaphragm
- Conforms to CGA
E-4 Standard for Gas Pressure Regulators
155MIN-125
MODEL #
|
GAS SERVICE |
MAXIMUM INLET PRESSURE (PSI) |
MAXIMUM DELIVERY PRESSURE (PSI) |
INLET GAUGE |
OUTLET GAUGE |
INLET CONNECTION |
OUTLET CONNECTION |
155MIN-125
|
Oxygen, Inert Gas, Air |
3000 |
5-125 |
2-1/2", 4000PSI |
2-1/2", 200PSI |
1"-11 1/2NPS RH(M) |
1"-11 1/2NPS RH(F) |
155MIN-200
|
Oxygen, Inert Gas, Air |
3000 |
10-200 |
2-1/2", 4000PSI |
2-1/2", 400PSI |
1"-11 1/2NPS RH(M) |
1"-11 1/2NPS RH(F) |
1 psi = 0.00689 MPa = 6.895
kPa = 0.06895 bar = 0.07 kgf / cm2,
1 SCFH = 0.0283 m3/h = 0.472 LPM
|
|
|
155TM Series Two Stage
Manifold Regulators
Model 155TM
Series Manifold Regulators are specially designed for manifold systems. They are
ideal for use with extra heavy flow gas distribution systems.
- Two stage
construction
- Body and housing
cap are machined from class "A" brass bar stock
- Delrin cap bushing
for smooth adjustments
- Sintered bronze
inlet filter
- 2-1/2" gauges for
easy reading
- 2" & 3-1/4"
diaphragms
- Conforms to CGA
E-4 Standard for Gas Pressure Regulators
155TMY-15
|
GAS SERVICE |
MAXIMUM INLET PRESSURE (PSI) |
MAXIMUM DELIVERY PRESSURE (PSI) |
INLET GAUGE |
OUTLET GAUGE |
INLET CONNECTION |
OUTLET CONNECTION |
155TMIN-125
|
Oxygen, Inert Gas, Air |
3000 |
5-125 |
2-1/2", 4000PSI |
2-1/2", 200PSI |
1"-11 1/2NPS RH(M) |
1"-11 1/2NPS RH(F) |
155TMIN-200
|
Oxygen, Inert Gas, Air |
3000 |
10-200 |
2-1/2", 4000PSI |
2-1/2", 400PSI |
1"-11 1/2NPS RH(M) |
1"-11 1/2NPS RH(F) |
155TMY-15
|
Acetylene |
400 |
2-15 |
2-1/2", 400PSI |
2-1/2", 30PSI, RL |
1"-11 1/2NPS LH(M) |
1"-11 1/2NPS LH(F) |
1 psi =
0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2,
1 SCFH = 0.0283 m3/h = 0.472 LPM
|
|
|
Third Party Trademark & Brand Notice
|
